Beach & Deco wings – Feather Flags

Standing out... our Beach Deco Wings make your brand clear and visible

The Borney Beach and Deco Wings are a great way to promote your business or company. These banners are ideal for both indoor and outdoor use and represent great value for money and are very easy to assemble. In addition, if you create a unique design you can really stand out from the competition. All of our flags are printed in house and usually finished within 5-7 working days.

Our Beach and Deco wings are made up of a digitally printed flag, pole, water base, ground spike and carry case. In addition a ‘wheel foot’ fitting is available for forecourt use.

Fitting Instructions

Beach Wing

Beach Wings – (3900mm x 850mm) Complete with digitally printed flag, 4 section pole (4.9m) cross base, water bag and carry bag – optional wheel foot, water filled base, ground screw.

You can choose any design, logo and colour to create your own unique beach wing.

Deco Wing

Deco Wings – (2900mm x 850mm) with 3.9m Deco Wing Pole, complete with carry case, metal base including digitally printed mirror imaged ‘logo’ flag onto knitted polyester sleeved with cut edge to suit.

	1) Remove the poles, groundscrew and flag from the carry case.
	2) Screw groundscrew into soft ground using the bar supplied of fill the hard standing base with water or sand.
	3) Separate all 4 sections of the pole and plug one into the top of the other to create a 4.8 meter pole.
	4) Push base of pole onto ground spike or into hard standing base. If using hard standing base, lightly tighten the screw collar.
	5) Slide the open end of the flags sleeve over the top of the pole and carefully pull down ensuring the tip of the pole fits into the very end of the sleeve.
	6) Pull the elastic tight creating the curve of the flag and tie off on the ring that is fitted at the base of the pole.