Beach & Deco tears – Feather Flags

Stand out from the crowd - Beach Deco Tears help your brand to get noticed

The Borney Beach and Deco Tears are a fabulous way to promote your company. With the unique design you can really stand out from the crowd. Ideal for indoor and outdoor use. Value for money and easy to assemble. All printed in house and usually available in 5 – 7 working days.

Our Beach and Deco Tears consist of digitally printed flag, pole, waterbase, ground spike and carry case. An additional wheelfoot fitting is available for forecourt use.

Instructions

Beach Tear – (307cm x 162cm) Complete with digitally printed flag, 4 section pole (4.9m), ground screw, waterfilled base and carry bag – optional wheelfoot. You can chose any design, logo and colour to create your own unique beach wing.

Deco Tear – (75cm x 145cm) with a 2.4m Deco Tear Pole, complete with carry case, metal base including digitally printed mirror imaged “logo” flag onto knitted polyester sleeved with cut edge to suit.

	1) Remove the poles, groundscrew and flag from the carry case.
	2) Screw groundscrew into soft ground using the bar supplied of fill the hard standing base with water or sand.
	3) Separate all 4 sections of the pole and plug one into the top of the other to create a 4.8 meter pole.
	4) Push base of pole onto ground spike or into hard standing base. If using hard standing base, lightly tighten the screw collar.
	5) Slide the open end of the flags sleeve over the top of the pole and carefully pull down ensuring the tip of the pole fits into the very end of the sleeve.
	6) Pull the elastic tight creating the curve of the flag and tie off on the ring that is fitted at the base of the pole.